Phone: 972 524 2979 / Fax: 972 524 8895 / E-mail: degagecorp@aol.com

DC-1200-CT Class 100 Cleanroom Poly Tubing - ISO 2Mil, 3Mil, 4Mil, 6Mil, 8Mil

This product is a strong general use cleanroom packaging film specifically designed for use in cleanroom packaging applications. It is extruded from virgin barefoot ldpe polyethylene to create class 100 cleanroom poly tubing. While it has a high level of cleanliness, it can be slightly difficult to open. This is one of the more cost effective cleanroom packaging options available, while still providing a high level of cleanliness, strength and ease of sealing. Class 100 Cleanroom Poly tubing will meet the following specs Class 100 - ISO Class 5 - JPG-5322-1 Available in - 2Mil, 3Mil, 4Mil, 6Mil, 8Mil

What Is JPG 5322.1G? BPA Free Guarantee BSE TSE Animal Component Free Guarantee Latex Free Guarantee

Available in the following configurations:
Class 100 Poly Bags - Class 100 Zip Lock Poly Bags - Class 100 Poly Tubing - Class 100 Gusseted Poly Bags - Class 100 Poly Sheets - Class 100 Poly Pouches - Class 100 Tote Covers - Class 100 Pallet Covers - Class 100 Square Bottom Bags -Cleanroom Lay Flat Tubing

Physical Properties
Material	Virgin Barefoot Class100 Polyethylene
Available As:	Lay-Flat Tubing
Clarity:	Transparent
Thickness:	.002Mil - .008Mil

Film Properties	ASTM Method	Units	Typical Value
Density	D-1505	g/cm3	0.920
Tensile Strength	D-882	PSI	•
MD	•	•	2900
TD	•	•	2300
Elongation (Break)	D-882	%	•
MD	•	•	•
TD	•	•	•
Dart Drop Impact	D-1709	Grams	80-100

Note: All values given are based on a 1.25mil thick film.

MATERIAL SAFETY DATA SHEET

DegageCorp . 002 - .008 LDPE Composition/Information on Ingredients

BALAZS ANALYTICAL TESTING SERVICES "LDPE Test Results"
Analyte	Reporting Limit (ug/Cm2)	Sample 1 LDPE	Sample 2 A/S Poly LDPE
Bromide	0.001	•	•
Chloride	0.002	•	•
Fluoride	0.002	•	•
Nitrate	0.002	•	•
Nitric	0.002	•	•
Phosphate	0.002	•	•
Sulfate	0.001	•	•
Ammonium	0.0001	0.001	0.032
Potassium	0.007	•	•
Sodium	0.007	•	•

INGREDIENT NAME	CAS#	Weight %
Polycaprolactam (Non hazardous)	25038-54-4	Proprietary

Trace impurities and additional material names not listed above may also appear in the Regulatory Information section towards the end of the MSDS. These materials may be listed for local "Right to Know" compliance and for other reasons.

HAZARDS IDENTIFICATION:
EMERGENCY OVERVIEW: A clear or colored plastic film. Not considered hazardous under normal usage. Can release irritating and/or toxic vapors if involved in a fire.

POTENTIAL HEALTH HAZARDS:
SKIN: Not considered hazardous.
EYES: Not considered hazardous. May cause mechanical irritation if film comes into contact with the eye.
INHALATION: Not a route of exposure under normal usage. Elevated processing temperatures may release irritating vapors.
INGESTION: NOT a route of exposure. Not considered hazardous.
DELAYED EFFECTS: None known
ENGINEERING CONTROLS: General room ventilation plus local exhaust at points of fume generation to maintain exposure below the PEL/TLV exposure limits.

PERSONAL PROTECTIVE EQUIPMENT:
SKIN PROTECTION: Not normally required. Use heat resistant gloves if handling melted material.
EYE PROTECTION: As a general practice in manufacturing areas, safety glasses that conform to ANSI Z87.1 should' be worn.
RESPIRATORY PROTECTION: Under normal usage, not normally required. A NIOSH/MSHA approved respirator should be worn in areas where the PEL/TLV is exceeded.
ADDITIONAL RECOMMENDATIONS: None

EXPOSURE GUIDELINES:

INGREDIENT NAME	ACGIH TLV	OSHA PEL
		TW A = 20mg/m3 STEL = 40mg/m3

** = Workplace Environmental Exposure Level (AlHA).
*** = Biological Exposure Index (ACGIB).

OTHER EXPOSURE LI~UTS FOR POTENTIAL DECOMPOSITION PRODUCTS: None

PHYSICAL AND CHEMICAL PROPERTIES

PHYSICAL STATE	Solid
ODOR	None
SPECIFIC GRAVITY (Water = 1.0)	1.05-1.25
SOLUBILITY IN WATER <"Weight %)	Negligible
pH	Not applicable
BOILING POINT	Not applicable
MELTING POINT	220-223°C (428-433°F)
VAPOR PRESSURE	Negligible at room temperature
VAPOR DENSITY (Air = 1.0)	Not determined
EVAPORATION RATE	Not applicable
COMPARED TO	Not applicable
% VOLATILES	Negligible
FLASH POINT	> 400°C

STABILITY AND REACTIVITY:

NORMALLY STABLE (CONDITIONS TO AVOID): Normally stable, Avoid exposure to open flame or temperatures exceeding recommended processing temperatures.
Incompatibilities: Strong oxidizing agents, acids, and bases.
HAZARDOUS DECOMPOSITION PRODUCTS: Thermal decomposition products may include: caprolactam, carbon monoxide, carbon dioxide, hydrogen Cyanide, and ammonia when exposed to extreme heat.
HAZARDOUS Polymerization: Will not occur.

TOXICOLOGICAL INFORMAITON:

IMMEDIATE (ACUTE) EFFECTS: Not determined.
DELAYED (SUBCHRONIC &CHRONIC) EFFECTS: None known
ECOLIGICAL INFORMATION: Material is considered inert and not expected to be biodegradable or toxic.
DISPOSAL CONSIDERATIONS: Not Applicable
RCRA:
Is the unused product a RCRA hazardous waste if discarded? No
If yes, the RCRA ID number is:

OTHER DISPOSAL CONSIDERATIONS:

Dispose of in compliance with Federal, state and local government regulations. Usually considered an inert package material that can be recycled-or land filled.

The information offered here is for the products shipped. Use an/or alterations to the product such as mixing with other materials may significantly change the characteristics of the material and alter the RCRA classification and proper disposal method.

TRANSPORT INFORMATION:
US DOT HAZZARD CLASS: Not regulated
US DOT ID#: Not applicable

REGULATORY INFORMATION:
TOXIC SUBSTANCES CONTROL ACT (TSCA)

TSCA INVENTORY STATUS: All components used to produce the above formulations-are listed on the TSCA Inventory.

OTHER TSCA issues: None

SARA TITLE IU/CERCLA: "Reportable Quantities"(RQs) and/or "Threshold Planning Quantities" (TPQs) exist for the following ingredients:

INGREDIENT	SARA/CERCLA RQ (lb)	SARA EHS TPO (Ib)
No ingredients listed in this section

Spills resulting in the loss of any ingredient at or above its RQ require immediate notification to the National Response Center (1- 800-424-8802) and. to your local emergency planning committee.

SECTION 311 HAZARD CLASS: None

SARA 313 TOXIC CHEMICALS: The following ingredients are SARA 313 "Toxic Chemicals". CAS #'s and weight percents are found under composition/information on ingredients.

INGREDIENT	COMMENT
No ingredients listed in this section

STATE RIGHT TO KNOW: In addition to the ingredients found in section composition/information on ingredients. The following are listed for state Right-to-know purposes:

INGREDIENT	WT.%	COMMENT
No ingredients listed in this section

It is your responsibility to determine that our product is safe, lawful, and technically suitable for your intended uses. This material safety data sheet cannot cover all possible situations which the user may experience during processing. Each aspect of the user’s operation should be examined to determine if, or where, additional precautions may be necessary. All health and safety information contained in this material safety data sheet should be provided to employees and/or customers. Degage Corp must rely on the user to use this information to develop appropriate work practice guidelines and employee instructional programs specific to the user’s operation.

As the conditions and methods of use are beyond our control, we do not assume any responsibility and expressly disclaim any liability for any use of these products. Information contained herein is believed to be true and accurate, but all statements or suggestions are made without warranty, expressed, or implied, regarding accuracy of the information, the hazards connected with the use of the material or the results to be obtained from the use thereof. Compliance with all applicable international, federal, state, and local laws and regulations regarding the use, storage, sale, transport or disposal of this material is the responsibility of the user.

Degage Corp. does not endorse or claim suitability of its product for any particular use. Degage Corp. MAKES NO

WARRANTY OF MERCHANTABILITY AS TO ITS LDPE RESINS. Degage Corp. MAKES NO WARRANTIES, EXPRESS OR IMPLIED, CONCERNING THE SUITABILITY OR FITNESS OF ANY Degage Corp. PRODUCT FOR ANY PARTICULAR USE. Degage Corp's liability and your exclusive remedy for any claim arising out of the sales of its products are expressly limited at Degage Corp's option to replacement of non-performing goods or payment not to exceed the purchase price plus transportation charges thereon in respect to any material which damage is proven and claimed.

The information in this MSDS is valid for cited regulations published as of the date this document was prepared, as shown on page 1. Updates may be prepared as the regulations are amended or pending revised information about the resin. It is the customer’s responsibility to seek updated regulatory information on any specific resin.