DC-2000C Class 100 Cleanroom Nylon Bags and Tubing - MIL-B-22191 TYPE III - JPG-5322-1 Level 100 - ISO Class-5 - 2Mil

DC-2000-C DegageCorp’s - DuPont Nylon #6, Cleanroom Film and Bags – Clear or Orange Anti-Static

DegageCorp # DC 2000C, DuPont Nylon #6 film, is a product that can be cleaned to the most stringent specifications due to its hard surface. It is a strong abrasion resistant film that is used in a variety of cleanroom packaging applications where puncture resistance, high tear strength, and extreme cleanliness are required. DuPont Nylon #6 is an unplasticized, FDA approved, food grade, clear film, that offers the lowest levels of particulate counts of any cleanroom film and is very low in ionic contamination and non-volatile residue.DegageCorp DC2000C, DuPont Nylon #6 bags are an excellent choice for the packaging of orthopedic, medical, pharmaceutical, or electronic parts that have sharp edges or points, and require a stronger and cleaner packaging environment.


What is MIL-PRF-22191?    What Is JPG 5322.1G?    BPA Free Guarantee    BSE TSE Animal Component Free Guarantee    Latex Free Guarantee

Physical Properties
Material DuPont  Clear Nylon #6, or Anti-Static Orange
Available As Bags, Tubing, Sheeting, Centerfold
Clarity Transparent
Thickness 2 Mil (.002)

Film Properties ASTM Method Units Typical Value
Tensile Strength (Break) D882 PSI 10,000
Tear Strength   Gm/m 50-100
M.V.TR. E96 Gm/100sq.in./24hr 3.3
Oxygen Transmission D1434 Cc/100sq in/24hrs.@75F 500

DegageCorp .002 mill Nylon Bag Class100 Leachable Anions and Cations by Ion Chromatography Ionic Contamination Typical test results.

Anions Dl*
Fluoride (F) 2.0 450
Chloride (CI) 1.0 1,400
Nitrite (NO2") 1.0 580
Bromide (Br) 0.5 <0.5
Nitrate (N03') 0.5 500
Sulfate (SO4') 0.5 550
Phosphate (PO4) 0.5 780
Cations
lithium (Li+) 5.0 <5
Sodium (Na+) 1.0 37,000
Ammonium (NH4+) 2.0 26,000
Potassium (K+) 1.0 680
Magnesium (Mg2+) 1.0 30
Calcium (Ca2+) 1.0 36

*DL = detection limits are in 1011 molecules/ cm2"
Note: The bags were leached with DI water at room temperature for 24 hours. The extracts were then analyzed for anions and cations by ion chromatography (IC).

MATERIAL SAFETY DATA SHEET

DegageCorp . 002 MIL CLEAR NYLON BAGS, TUBING AND FILM.  Composition/Information on Ingredients

INGREDIENT NAME CAS# Weight %
Polycaprolactam (Non-hazardous) 25038-54-4 Proprietary

Trace impurities and additional material names not listed above may also appear in the Regulatory Information section towards the end of the MSDS. These materials may be listed for local "Right to Know" compliance and for other reasons.

HAZARDS IDENTIFICATION:
EMERGENCY OVERVIEW: A clear or colored plastic film. Not considered hazardous under normal usage. Can release irritating and/or toxic vapors if involved in a fire.

POTENTIAL HEALTH HAZARDS:
SKIN: Not considered hazardous.
EYES: Not considered hazardous. May cause mechanical irritation if film comes into contact with the eye.
INHALATION: Not a route of exposure under normal usage. Elevated processing temperatures may release irritating vapors.
INGESTION: NOT a route of exposure. Not considered hazardous.
DELAYED EFFECTS: None known
ENGINEERING CONTROLS: General room ventilation plus local exhaust at points of fume generation to maintain exposure below the PEL/TLV exposure limits.

PERSONAL PROTECTIVE EQUIPMENT:
SKIN PROTECTION: Not normally required. Use heat resistant gloves if handling melted material.
EYE PROTECTION: As a general practice in manufacturing areas, safety glasses that conform to ANSI Z87.1 should' be worn.
RESPIRATORY PROTECTION: Under normal usage, not normally required. A NIOSH/MSHA approved respirator should be worn in areas where the PEL/TLV is exceeded.
ADDITIONAL RECOMMENDATIONS: None

EXPOSURE GUIDELINES:

INGREDIENT NAME ACGIH TLV OSHA PEL
    TW A = 20mg/m3   STEL = 40mg/m3

** = Workplace Environmental Exposure Level (AlHA).
*** = Biological Exposure Index (ACGIB).

OTHER EXPOSURE LI~UTS FOR POTENTIAL DECOMPOSITION PRODUCTS: None

PHYSICAL AND CHEMICAL PROPERTIES

PHYSICAL STATE Solid
ODOR None
SPECIFIC GRAVITY (Water = 1.0) 1.05-1.25
SOLUBILITY IN WATER <"Weight %) Negligible
pH Not applicable
BOILING POINT Not applicable
MELTING POINT 220-223°C (428-433°F)
VAPOR PRESSURE Negligible at room temperature
VAPOR DENSITY (Air = 1.0) Not determined
EVAPORATION RATE Not applicable
COMPARED TO Not applicable
% VOLATILES Negligible
FLASH POINT > 400°C

STABILITY AND REACTIVITY:

NORMALLY STABLE (CONDITIONS TO AVOID): Normally stable, Avoid exposure to open flame or temperatures exceeding recommended processing temperatures.
Incompatibilities: Strong oxidizing agents, acids, and bases.
HAZARDOUS DECOMPOSITION PRODUCTS: Thermal decomposition products may include: caprolactam, carbon monoxide, carbon dioxide, hydrogen Cyanide, and ammonia when exposed to extreme heat.
HAZARDOUS Polymerization: Will not occur.

TOXICOLOGICAL INFORMAITON:

IMMEDIATE (ACUTE) EFFECTS: Not determined.
DELAYED (SUBCHRONIC &CHRONIC) EFFECTS: None known
ECOLIGICAL INFORMATION: Material is considered inert and not expected to be biodegradable or toxic.
DISPOSAL CONSIDERATIONS: Not Applicable
RCRA: Is the unused product a RCRA hazardous waste if discarded?  No
If yes, the RCRA ID number is:

OTHER DISPOSAL CONSIDERATIONS:

Dispose of in compliance with Federal, state and local government regulations. Usually considered an inert package material that can be recycled-or land filled.
The information offered here is for the products shipped. Use an/or alterations to the product such as mixing with other materials may significantly change the characteristics of the material and alter the RCRA classification and proper disposal method.

TRANSPORT INFORMATION:
US DOT HAZZARD CLASS: Not regulated
US DOT ID#: Not applicable

REGULATORY INFORMATION:
TOXIC SUBSTANCES CONTROL ACT (TSCA)

TSCA INVENTORY STATUS: All components used to produce the above formulations-are listed on the TSCA Inventory.

OTHER TSCA issues: None

SARA TITLE IU/CERCLA: "Reportable Quantities"(RQs) and/or "Threshold Planning Quantities" (TPQs) exist for the following ingredients:

INGREDIENT SARA/CERCLA RQ (lb) SARA EHS TPO (Ib)
No ingredients listed in this section    

Spills resulting in the loss of any ingredient at or above its RQ require immediate notification to the National Response Center (1- 800-424-8802) and. to your local emergency planning committee.

SECTION 311 HAZARD CLASS: None

SARA 313 TOXIC CHEMICALS: The following ingredients are SARA 313 "Toxic Chemicals". CAS #'s and weight percent's are found under the composition / information on ingredients.

INGREDIENT COMMENT
No ingredients listed in this section  

STATE RIGHT TO KNOW: In addition to the ingredients found in section composition/information on ingredients. The following are listed for state Right-to-know purposes:

INGREDIENT WT.% COMMENT
No ingredients listed in this section    

Additional Regulatory Information: The base monomers listed on the EINECS Inventory WHM'S CLASSIFICATION (CANADA): Not a controlled substance. (Considered to be a manufactured article)

Cleanroom Nylon - Class 100 Nylon - Cleanroom Nylon Packaging - Class 100 Nylon Packaging - Cleanroom Nylon Tubing - Cleanroom Nylon Bags - Class 100 Nylon Tubing - Class 100 Nylon Bags