DC-7000-C Cleanroom Gusseted Static Shielding Bags Flat or Zip Lock Bags MIL-PRF-81705D, TYPE III, CLASS 1 JPG-5322-1 Level 100 - 3Mil Only

DC-7000-C Static Shielding cleanroom bags MIL-PRF-81705D, TYPE III, CLASS 1. Class 100 Cleanroom Static Shielding bags Gusseted bags, Pouches, Zip Lock

What Is ESD Protection?

  DegageCorp. Class 100 (ISO Class 5) clean room film ("Metal-In") static shielding bags will also meet the military specification of MIL-PRF-81705D, type 3 as well as the cleanliness specification of NASA JPG 5322-1 Level 100 and ISO 14644-1 Class 5. DegageCorps. metalized static shielding bags are a 3mil composite consisting of an outer layer of static dissipative coating applied to a layer of polyester that is vacuum deposited with a conductive aluminum metal coating and laminated to an inner layer of permanent static dissipative 108th low density polyethylene. The DegageCorp. Transparent static shielding bag provides complete shielding from electrostatic discharge, RFI frequencies and EMI impulses. DegageCorps. static shielding bags instantly dissipate static charges. Loaded circuit boards can be safely handled and stored, shipped and are readily identified without removal when placed in our transparent static shielding bags. Your products are static secure and totally enclosed in a Faraday Cage environment. Electrostatic voltages applied to the outside of the bag cannot affect components within the bag. This is not the case with  Anti-Static bags which slowly dissipate static charges. Slow dissipation generally results in increased voltages inside anti-static polyethylene bags, potentially causing component degradation. The DegageCorp. Transparent static shielding is the best protection available for static sensitive components that are being brought into an ISO Class 5 cleanroom.

Cleanroom Static Shielding Bags - Cleanroom Static Shielding Zip Lock Bags - Cleanroom Static Shielding Gusseted Bags - Cleanroom Static Shielding Wafer Boat Bags - Cleanroom Static Shielding Pouches

Physical Properties Test Method Specifications
Thickness PST #001 3.0 Mil
Yield PST #002 9000 Sq. In/Lb
Tensile Strength ASTM D 882 15LBS/IN
Puncture Resistance FTMS 101C Method 2065 >13 LBS.
Tear Initiation ASTM D 1004-94A >2 LBS.
Mullen Burst ASTM D 774 84 PSI
Seam Strength ASTM D 882 >12 LBS/IN
Haze ASTM D 1003 4%
Optical Density   .40
Transparency ASTM D 1003 40%
Heat Seal   3750F 0.5 SEC 60 PSI
Blocking   NONE
Electrical Properties  Test Method Specification
Surface Resistivity ASTM D 257 at 15% RH



Electrostatic Decay FTMS 101 Method 4046 .01 Sec
Capacitance Probe EIA-541 <10 Volts Difference
Metal Layer ETS-8C3 at 15% RH <100 (OHMS)

 Meets or exceeds electrical requirements of

MIL-PRF-81705D,Type III, Class 1

Chemical Properties     Test Method  Specification
Contact Corrosivity FTMS 101C Method 3005 (sodium Fluoride Phosphate & Sodium Ions) No Visible signs after testing at deterioration.

Class 100  Static Shielding Bags - Class 100 Static Shielding Zip Lock Bags - Class 100 Static Shielding Gusseted Bags - Class 100 Static Shielding Wafer Boat Bags - Class 100 Static Shielding Pouches - Cleanroom Gusseted - Class 100 Gusseted - Cleanroom Packaging - Class 100 Packaging